ILX LIGHTWAVE FPM-8210 CALIBRATION and ILX LIGHTWAVE FPM-8210 REPAIR
 
A calibration by Custom-Cal is performed by engineers with extensive OEM experience. We have the expertise and the necessary standards to perform the ILX LIGHTWAVE FPM-8210 Calibration, onsite calibration may be available. We specialize in quick turnaround times and we can handle expedited deliveries upon request.

Need another Optical Power Meter?
Shop for Comparable Products on our  used Optical Power Meter page or new Optical Power Meter page

 
   ILX LIGHTWAVE FPM-8210   Description / Specification:    
ILX LIGHTWAVE FPM-8210 Single Channel Optical Power Meter

The ILX Lightwave FPM-8210 Fiber Optic Power Meter has a single input port for both connectorized and bare fiber measurements. Virtually insensitive to polarization state or to pattern changes from fiber orientation, these meters deliver repeatable high resolution results. ILX Lightwave engineered the FPM-8210 for the production test workstation. The innovative fiber optic head design makes reliable fiber endface positioning a routine task, whether or not the fiber has a connector. With the CA-120 Bare Fiber Adapter, this meter is compatible with either ILX Lightwave or Agilent bare fiber holders.
Specifications.

Wavelength Range: 800 to 1650 nm.
Power Range: -70 to +20 dBm.
Damage Threshold: >+40 dBm.
Accuracy Reference Conditions: ±2.5%.
Accuracy Operating Conditions: ±5.0%.
Polarization Dependent Response: ±0.002 dB, typical.
Measurement Repeatability: ±0.003 dB, typical.
Sensor Type: InGaAs.
Noise: <=100 pW p-p (1200 at 1630nm) typical <40pW p-p at 1310 and 1550 nm.
Temperature Coefficient: Typical ±0.2%/°C.
Linearity: ±0.02 dB, ±100 pW (-60dBm to 20dBm).
Analog Output Bandwidth: Typical 0 to 10 Hz typical, Voltage: 0 to 10V, Impedance: Typical 1000 ohm.



 

Standard Calibration $190.00 *
Click on Logo for More Prices
*This is a Web introductory price for one calibration of the ILX LIGHTWAVE FPM-8210. Price does not in most cases include measurement performance data. Pricing does include NIST traceable calibration and issue of a calibration certificate and calibration label. Pricing may vary slightly due to volume and location of laboratory supporting calibration. Volume pricing may apply. On-site fees may apply depending on logistics, location and volume of work to be completed during the visit.


Related Optical Terms and Definitions. For a complete list go to our  Terms and Definitions Page.

Absolute Wavelength Accuracy
Absolute Wavelength Accuracy is the maximum difference between the actual wavelength and the displayed wavelength of the Optical Source. Wavelength is defined as wavelength in vacuum.

Decibel (dB)
A unit of measurement of optical power which indicates relative power. A -10 dB means a reduction in power by 10 times, -20 dB means another 10 times or 100 times overall, -30 means another 10 times or 1000 times overall and so on.

Nanometer (nm)
A unit of measure used to measure wavelength of light, meaning one one-billionth of a meter

Relative Intensity Noise (RIN)
Relative intensity noise (RIN), describes the instability in the power level of a laser. The noise term is important to describe lasers used in fiber-optic communication and LIDAR remote sensing. It is the square of the (spectrally resolved) RMS optical power amplitude divided by the measurement bandwidth and the square of the average optical power, expressed in dB/Hz.

Total Return loss
In an optical fiber, the loss that takes place at any discontinuity of refractive index, especially at an air-glass interface such as a fiber endface, at which a fraction of the optical signal is reflected back toward the source. RL = - 10log10 (Preflected/Preference)

Please contact us for your ILX LIGHTWAVE FPM-8210 CALIBRATION and/or ILX LIGHTWAVE FPM-8210 Single Channel Optical Power Meter REPAIR
I'm interested in: 
Calibration Type (Select one):
Repair Information:
 Serial Number:

 Is there any physical damage?  
 If yes, describe:


What is the description of the problem?

How/when did the problem start?


 (*) Required Fields    For formal quote please fill in all fields.
Company:
From (Email):*
Contact Name:*
Country:*
Address 1:
Address 2:
City:
State/Territory/Province: *
Zip/Postal Code:
Phone:*

Comment: